Page 1 sur 1

presentation: fred57440

Posté : dim. 9 juin 2013 23:57
par fred57440
bonsoir,
je m'appel frederic, 31 ans et j'habite en moselle.

J'ai comme projet de me construire un quadrirotor.

Je me suis deja fais une liste de ce que je voulais commander sur hobbyking mais j'attends des avis de gens plus experimenté afin de savoir si ma configuration sera homogene ou si je fais de mauvais choix.

voici la liste de ce que je compte acheter:

http://www.hobbyking.com/hobbyking/store/%5F%5F2165%5F%5FTURNIGY%5FPlush%5F40amp%5FSpeed%5FController.html" TURNIGY Plush 40amp Speed Controller $79.80

http://www.hobbyking.com/hobbyking/store/%5F%5F2169%5F%5FTURNIGY%5FBESC%5FProgramming%5FCard.html" TURNIGY BESC Programming Card $6.91

http://www.hobbyking.com/hobbyking/store/%5F%5F35055%5F%5FBoscam%5F5%5F8GHz%5FDiversity%5FReceiver%5F7%5F0%5FInch%5FTFT%5FLCD%5FMonitor%5Ffor%5FFPV%5F800x480%5FLED%5FBacklight.html"Boscam 5.8GHz Diversity Receiver 7.0 Inc.. $159.99

http://www.hobbyking.com/hobbyking/store/%5F%5F33998%5F%5FUBLOX%5FLEA%5F6H%5FGPS%5FModule%5Fw%5FBuilt%5Fin%5FAntenna%5F2%5F5m%5FAccuracy.html" UBLOX LEA-6H GPS Module w/Built-in Anten.. $51.95

http://www.hobbyking.com/hobbyking/store/%5F%5F9572%5F%5FNylon%5FXT60%5FConnectors%5FMale%5FFemale%5F5%5Fpairs%5FGENUINE.html" Nylon XT60 Connectors Male/Female (5 pai.. $3.29


http://www.hobbyking.com/hobbyking/store/%5F%5F37328%5F%5FHKPilot%5FMega%5FV2%5F5%5FFlight%5FController%5FUSB%5FGYRO%5FACC%5FMAG%5FBARO.html" - HKPilot Mega V2.5 Flight Controller USB/.. $75.79

http://www.hobbyking.com/hobbyking/store/%5F%5F29600%5F%5FHobbyking%5FX650F%5FGlass%5FFiber%5FQuadcopter%5FFrame%5F550mm.html- Hobbyking X650F Glass Fiber Quadcopter F.. $33.99

http://www.hobbyking.com/hobbyking/store/%5F%5F33023%5F%5FNTM%5FProp%5FDrive%5FSeries%5F35%5F30%5F1100kv%5F380w.html - NTM Prop Drive Series 35-30 1100kv / 380.. $69.80


http://www.hobbyking.com/hobbyking/store/%5F%5F15214%5F%5FGyro%5FFlight%5FController%5FMounting%5FPad%5F10pcs%5Fbag%5F.htm- Gyro / Flight Controller Mounting Pad (1.. $1.95

http://www.hobbyking.com/hobbyking/store/%5F%5F25821%5F%5F10x4%5F5%5FSF%5FProps%5F2pc%5FStandard%5FRotation%5F2%5Fpc%5FRH%5FRotation%5FRed%5F.html - 10x4.5 SF Props 2pc Standard Rotation/2 .. $2.60

http://www.hobbyking.com/hobbyking/store/%5F%5F25820%5F%5F10x4%5F5%5FSF%5FProps%5F2pc%5FStandard%5FRotation%5F2%5Fpc%5FRH%5FRotation%5FGreen%5F.html- 10x4.5 SF Props 2pc Standard Rotation/2 .. $2.80

http://www.hobbyking.com/hobbyking/store/%5F%5F23344%5F%5FLED%5FStrip%5Fwith%5FJST%5FConnector%5F200mm%5FBlue%5F.html- LED Strip with JST Connector 200mm (Blue.. $1.99

"http://www.hobbyking.com/hobbyking/stor ... w%5F.html- LED Strip with JST Connector 200mm (Yell.. $1.99

http://www.hobbyking.com/hobbyking/store/%5F%5F28514%5F%5FLED%5FRed%5FGreen%5FBlue%5FRGB%5FStrip%5F25cm%5Fw%5FFlying%5FLead.html- LED Red, Green, Blue (RGB) Strip 25cm w/ $4.98

http://www.hobbyking.com/hobbyking/store/%5F%5F9678%5F%5FTurnigy%5FPure%5FSilicone%5FWire%5F14AWG%5F1mtr%5FRED.html - Turnigy Pure-Silicone Wire 14AWG (1mtr) $1.19

http://www.hobbyking.com/hobbyking/store/%5F%5F9679%5F%5FTurnigy%5FPure%5FSilicone%5FWire%5F14AWG%5F1mtr%5FBLACK.html - Turnigy Pure-Silicone Wire 14AWG (1mtr) $1.19

http://www.hobbyking.com/hobbyking/store/%5F%5F11852%5F%5FTurnigy%5FPure%5FSilicone%5FWire%5F18AWG%5F1mtr%5FBlack.html Turnigy Pure-Silicone Wire 18AWG (1mtr) . $0.51

http://www.hobbyking.com/hobbyking/store/%5F%5F11851%5F%5FTurnigy%5FPure%5FSilicone%5FWire%5F18AWG%5F1mtr%5FRed.html - Turnigy Pure-Silicone Wire 18AWG (1mtr) .. $0.61

http://www.hobbyking.com/hobbyking/store/%5F%5F23133%5F%5FJST%5FXH%5Fto%5FJST%5FLED%5FPower%5FDistribution%5FLead%5F4%5FJST%5F.html - JST-XH to JST LED Power Distribution Lea.. $0.99

http://www.hobbyking.com/hobbyking/store/%5F%5F9631%5F%5FJST%5FFemale%5F2%5Fpin%5Fconnector%5Fset%5F10pcs%5Fset%5F.html JST Female 2 pin connector set (10pcs $0.86

http://www.hobbyking.com/hobbyking/store/%5F%5F9630%5F%5FJST%5FMale%5F2%5Fpin%5Fconnector%5Fset%5F10pcs%5Fset%5F.html - JST Male 2 pin connector set (10pcs/set) $1.04

TOTAL: $504.22 3972g



qu en pensez vous?

Re: presentation: fred57440

Posté : lun. 10 juin 2013 07:07
par Dehas
Salut Fred, bienvenue ici, l'ardu n'est pas facile a régler, j'en ai fais l'expérience samedi.
Pense a te localiser sur la carte des membres.

Re: presentation: fred57440

Posté : lun. 10 juin 2013 07:34
par Redeos
Bienvenue a toi

Re: presentation: fred57440

Posté : lun. 10 juin 2013 09:08
par green
Bienvenue :)

Re: presentation: fred57440

Posté : lun. 10 juin 2013 09:16
par fryzer
Welcome ...

Re: presentation: fred57440

Posté : lun. 10 juin 2013 09:25
par ziggy95
Bienvenu.

Prends un led switch pour allumer tes leds par ta rc
http://www.hobbyking.com/hobbyking/stor ... itch_.html" onclick="window.open(this.href);return false;

Prends ca pour flasher tes esc en simonk.
Renseignes toi bien car dans les discussions de la page de tes esc, 1 dit de pas flasher en simonk et d'autres oui.
Pas le temps de fouiller pour voir qui a raison

http://www.hobbyking.com/hobbyking/stor ... _Tool.html" onclick="window.open(this.href);return false;

C'est pour faire quoi les jst connecteurs ?

Re: presentation: fred57440

Posté : lun. 10 juin 2013 09:54
par hermey
Bienvenue

Envoyé depuis mon Galaxy Nexus avec Tapatalk

Re: presentation: fred57440

Posté : lun. 10 juin 2013 11:44
par Hadok
Bén-vengudo....

Re: presentation: fred57440

Posté : lun. 10 juin 2013 13:42
par Bendak
Bienvenue à toi !

Re: presentation: fred57440

Posté : lun. 10 juin 2013 17:47
par olivier30900
Bienvenue !

Ouvre un sujet pour ton projet, ici c'est les présentations ;).
@++

Re: presentation: fred57440

Posté : lun. 10 juin 2013 20:56
par artdeschoix
Bonjour
et bienvenue ...

@+ René 8|

Re: presentation: fred57440

Posté : lun. 10 juin 2013 22:37
par Bullrog
Salut, et bienvenue

Je vois que tu veux envoyer du gros ... :D

Re: presentation: fred57440

Posté : lun. 10 juin 2013 23:01
par fred57440
merci à tous,

J'ai modifier mon projet,j'ai ouvert un post ici :

http://multi-rotor-fans-club.com/viewto ... =40&t=2722" onclick="window.open(this.href);return false;

Re: presentation: fred57440

Posté : lun. 10 juin 2013 23:42
par MeKam
Image

Re: presentation: fred57440

Posté : mer. 12 juin 2013 17:20
par cedricz
Bienvenue ! :hello:

Re: presentation: fred57440

Posté : mer. 12 juin 2013 18:19
par mrnene
Bienvenue :hello: