Nouveau Firmware ZeroUAV

Modérateur : Dehas

Avatar du membre
mlebret
Octocopter
Messages : 573
Enregistré le : sam. 9 mars 2013 11:27
Réputation : 5
Localisation : Sud Quimper

Nouveau Firmware ZeroUAV

Message non lu par mlebret »

Salut,

Dans la section Download du site ZeroUAV, une mise à jour firmware est disponible:
YS-X4-X4P-Gemini-M-S-adaptive-abroad-20140601-Enc

Il y'a aussi quelque chose pour le YS-S4: s4v2-Standard-20140717-v057

Mise à jour OK sur mon Gemini, je n'avais pas été confronté à ces bugs.

Marc
release note:


1 available for X4, X4P,X4V2, GEMINI-M, GEMINI-S;.

2 fix the bug that could not arm the motors by pushing the throttle stick within 5 seconds when the copter turns over in sky in the situation of flying in manual mode and ruduce the throttle to the bottom.

3 fix the bug that the copter drops hight in the situation of entering the auto navigation mode unexpected but the course are not uploaded to the copter.

4 fix the bug that a zero gyro process is needed to reset the gyro after calibrating the magnetic compass.


Avatar du membre
mlebret
Octocopter
Messages : 573
Enregistré le : sam. 9 mars 2013 11:27
Réputation : 5
Localisation : Sud Quimper

Re: Nouveau Firmware ZeroUAV

Message non lu par mlebret »

Mise à jour du 4 aout 2014, pour YS-X4 et Gemini
YS-X4-X4P-Gemini-M-S-adaptive-abroad-20140607

release note:


1 available for X4,X4P,X4V2,Gemini-M,Gemini-S;

2 delete the function of opening the parachute by manual in case of mis-operation;

3 for testing the opening parachute function, you can use the phone gcs software;

4 add the function that che CH8 to control the gimbal to take picture in single Tx transmitter mode;

5 increase the sensitivity of the copter operated in GPS mode;

6 no altitude and distance limit;

7 no need to check the F/S before arming the motors;
A confirmer lors des prochains vols,

Marc


Avatar du membre
leraver
Octocopter
Messages : 559
Enregistré le : lun. 29 oct. 2012 16:28
Réputation : 0
Localisation : Montesson (78)
Contact :

Re: Nouveau Firmware ZeroUAV

Message non lu par leraver »

Tu vole avec lequel de gemini, le M ou le full?
mlebret a écrit :Salut,

Dans la section Download du site ZeroUAV, une mise à jour firmware est disponible:
YS-X4-X4P-Gemini-M-S-adaptive-abroad-20140601-Enc

Il y'a aussi quelque chose pour le YS-S4: s4v2-Standard-20140717-v057

Mise à jour OK sur mon Gemini, je n'avais pas été confronté à ces bugs.

Marc
release note:


1 available for X4, X4P,X4V2, GEMINI-M, GEMINI-S;.

2 fix the bug that could not arm the motors by pushing the throttle stick within 5 seconds when the copter turns over in sky in the situation of flying in manual mode and ruduce the throttle to the bottom.

3 fix the bug that the copter drops hight in the situation of entering the auto navigation mode unexpected but the course are not uploaded to the copter.

4 fix the bug that a zero gyro process is needed to reset the gyro after calibrating the magnetic compass.


Avatar du membre
mlebret
Octocopter
Messages : 573
Enregistré le : sam. 9 mars 2013 11:27
Réputation : 5
Localisation : Sud Quimper

Re: Nouveau Firmware ZeroUAV

Message non lu par mlebret »

leraver a écrit :Tu vole avec lequel de gemini, le M ou le full?
Gemini M+S

Marc


Avatar du membre
leraver
Octocopter
Messages : 559
Enregistré le : lun. 29 oct. 2012 16:28
Réputation : 0
Localisation : Montesson (78)
Contact :

Re: Nouveau Firmware ZeroUAV

Message non lu par leraver »

Veinard, alors cela donne quoi en comparatif du X6 ou d'un x4v1?
Un gros plus la redondance?


Avatar du membre
Dehas
Administrateur du site
Messages : 16171
Enregistré le : ven. 3 juin 2011 12:50
Réputation : 5
Localisation : Saint Dié des Vosges
Genre :
Contact :

Re: Nouveau Firmware ZeroUAV

Message non lu par Dehas »

Petit HS, ça vous direz d'avoir une section Zero uav ??


Avatar du membre
mlebret
Octocopter
Messages : 573
Enregistré le : sam. 9 mars 2013 11:27
Réputation : 5
Localisation : Sud Quimper

Re: Nouveau Firmware ZeroUAV

Message non lu par mlebret »

Dehas a écrit :Petit HS, ça vous direz d'avoir une section Zero uav ??
Nous ne sommes pas très nombreux, pourquoi pas si la fréquentation augmente,

Marc


Avatar du membre
leraver
Octocopter
Messages : 559
Enregistré le : lun. 29 oct. 2012 16:28
Réputation : 0
Localisation : Montesson (78)
Contact :

Re: Nouveau Firmware ZeroUAV

Message non lu par leraver »

Cela pourrait être intéressant.
Nous sommes peut (a tord) d'utilisateurs mais qui sait.

Perso je vote pour


Avatar du membre
Dehas
Administrateur du site
Messages : 16171
Enregistré le : ven. 3 juin 2011 12:50
Réputation : 5
Localisation : Saint Dié des Vosges
Genre :
Contact :

Re: Nouveau Firmware ZeroUAV

Message non lu par Dehas »

Voila, la section est en place et j'ai déplacé les sujets, si j'en ai oublié, me le dire.


Avatar du membre
leraver
Octocopter
Messages : 559
Enregistré le : lun. 29 oct. 2012 16:28
Réputation : 0
Localisation : Montesson (78)
Contact :

Re: Nouveau Firmware ZeroUAV

Message non lu par leraver »

Merci bien on va tacher de faire vivre cela


Avatar du membre
mlebret
Octocopter
Messages : 573
Enregistré le : sam. 9 mars 2013 11:27
Réputation : 5
Localisation : Sud Quimper

Re: Nouveau Firmware ZeroUAV

Message non lu par mlebret »

leraver a écrit :Veinard, alors cela donne quoi en comparatif du X6 ou d'un x4v1?
Un gros plus la redondance?
La stabilité en mode manuel me semble meilleure que celle du YS-X6, en mode GPS, mon hexa se dandine un peu. Peut-être que le dernier firmware corrige cette tendance?

La redondance, surtout pour le moral, je n'ai pas constaté de changement d'IMU en vol suite à une anomalie.

Marc


Répondre

Retourner vers « Cartes et modules ZeroUAV »